logo
Loading...

Replacement Set of 10 x 2.5 Inch Water Filter Cartridges by Aquaboon (7 PCS) AB-4C5M-2S5M-1I

SKU#: AB-4C5M-2S5M-1I
In stock
Free Shipping for continental US
$25.49
BUY NOW
 
I need a specialist consultation. Book a call
Buy water filter cartridges kits at FilterWay.com

You are covered by this unconditional money-back guarantee for a full 30 days from your date of purchase.

Free Shipping for continental US

More about shipping
asd
M3
sdf
asd
123
123

Carbon Block Filter Cartridge (5 Micron)

Activated carbon block is a blend of fine activated carbon, water, and a suitable binder that is mixed and molded then hardened or extruded to a cartridge filter of any size and shape. Carbon block is made of fine coconut shell removing chlorine, odors and tastes of many compounds, at the same time it offers a much finer filtration of suspended particles and dirt.

Product Details:

  • Micron rating: 5 Micron
  • Dimensions: 9.75” x 2.5”
  • Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply
  • O-ring can be made of Silicone, Buna-N, EPDM, high temperature resistant and good sealing.
  • End cap is made of polypropylene material, it is reliably sealed and very durable.
  • Sintered activated carbon filter media can be made of coal, coconut and shell, efficiency to remove residual chlorine.
  • Inner layer is made out of highly porous absorbent material produced by heating organic matter such as coal, wood and coconut shell, in the absence of air, which is then crushed into granules.
  • Plastic net wrap PP non-woven fabric to steady the structure and to provide a better visual appearance.
    Outer layer is polypropylene non-woven fabric to filter the impurities and sludge.

Inline Pre/Post Membrane filter

Inline filter is made with premium coconut shell based activated carbon. Inline post carbon filter is known as polishing filter, because it is usually the last stage of any standard reverse osmosis circuit. Being made of high quality coconut shell, it stabilizes the water tasting qualities and further removes any traces of bad tastes and odors.

Product Details:

  • Dimensions: 10” x 2”
  • Lifetime: Replace once a year
  • End cap is made of polypropylene material, it is reliably sealed and very durable.
  • Inner layer is made out of highly porous absorbent material produced by heating organic matter such as coal, wood and coconut shell, in the absence of air.
  • Outer layer is made out of high quality polypropylene material, reliably sealed and very durable.

Sediment Water Filter Cartridge (5 Micron)

Sediment filter is made of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. These filters have graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron, catching smaller particles. Each filter cartridge is individually shrink-wrapped.

Product Details:

  • Micron rating: 5 Micron
  • Dimensions: 10” x 2.5”
  • Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply
  • Innermost Zone - small dust is filtered in the following layer to ensure the good filtration efficiency.
  • Inner Zone - Small particles pass the outer layers, then filtered by inner layers, which made out of the fine fiber.
  • Mid Zone - Multilayered structure layer and depth filtration pattern of the mid zone layer ensures good filtration efficiency and formed by thermal bond without use of any binders and adhesives.
  • Outer Zone-The large dusts are filtered in following layer to prolong the filter service life.

Granular Activated Carbon Water Filter (5 Micron)

Granular activated carbon is made of a highly porous adsorbent material, produced by heating organic matter, such as coal, wood and coconut shell, in the absence of air, which is then crushed into granules. Activated carbon is positively charged and therefore able to remove negative ions from the water such as ozone, chlorine, uorides by absorption onto activated carbon.

Product Details:

  • Micron rating: 5 Micron
  • Dimensions: 9.75” x 2.5”
  • Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply
  • O-ring can be made of silicone, BUNO-N, EPDM, high temperature resistant and sealed properly.
  • End cap is made of high polypropylene material, reliably sealed and very durable.
  • Outer layer is made out of high quality polypropylene material, reliably sealed and very durable.

CARBON FILTERS. Aquaboon Carbon Block Filters have high level chlorine reduction, great dirt-holding capacity, and greatly reduced carbon fines, you will soon make the Aquaboon filters your carbon block of choice.

SEDIMENT FILTERS. Aquaboon Sediment filters are made of fine melted polypropylene, which is blown and spun in a cylinder-like form. It removes large and fine particles from drinking water, such as sand, dirt, silt, and rust particles.

INLINE FILTERS. Aquaboon Inline Filters utilize coconut shell GAC and are designed to remove unpleasant taste and odor and reduce sediment to produce cleaner, clearer, better tasting water.

Write Your Own Review
You're reviewing:Replacement Set of 10 x 2.5 Inch Water Filter Cartridges by Aquaboon (7 PCS) AB-4C5M-2S5M-1I
Your Rating