Replacement Set of 10 x 2.5 Inch Water Filter Cartridges by Aquaboon (5 PCS) AB-2C5M-1S5M-1T33-100GPD

Product Details:

• Dimensions: 10” x 2”
• Lifetime: Replace once a year
• End cap is made of polypropylene material, it is reliably sealed and very durable.
• Inner layer is made out of highly porous absorbent material produced by heating organic matter such as coal, wood and coconut shell, in the absence of air.
• Outer layer is made out of high quality polypropylene material, reliably sealed and very durable.

1 Of Sediment Water Filter Cartridge (5 Micron)

Sediment filter is made of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. These filters have graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron, catching smaller particles. Each filter cartridge is individually shrink-wrapped.

Product Details:

• Micron rating: 5 Micron
• Dimensions: 10” x 2.5”
• Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply
• Innermost Zone - small dust is filtered in the following layer to ensure the good filtration efficiency.
• Inner Zone - Small particles pass the outer layers, then filtered by inner layers, which made out of the fine fiber.
• Mid Zone - Multilayered structure layer and depth filtration pattern of the mid zone layer ensures good filtration efficiency and formed by thermal bond without use of any binders and adhesives.
• Outer Zone-The large dusts are filtered in following layer to prolong the filter service life.

This membrane is rated at 100 Gallons per Day. If you have chlorinated water, we recommend you use a Carbon / Sediment Pre Filter. The residual chlorine in municipal or city water will destroy the Thin Film Composite (TFC) membrane. Hidrotek Reverse Osmosis Membrane elements are for home drinking water. The industry's most reliable advanced membrane technology and automated fabrication, allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers and residential customers can rely on.

• This membrane fits in standard 1.8" x 12" residential RO membrane housings.
• Home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi. Because of environmental factors actual production may vary.

Product Features:

• 100 Gallon Per Day Capacity
• 98% Stabilized Salt Rejection (Minimum Rejection 96%)
• NSF/ANSI Standard
• Membrane Dimensions: 11.75" Overall Length, 1.75" Diameter (Fits Standard 2" ID Membrane Housings)