10" Clear Standard Transparent Whole House Water Filter System with pressure relief button. 3/4" inlet/outlet brass port. Wrench and bracket are included. Our housings are used in various applications and usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation.

10" x 2.5" Sediment Water Filter Cartridge is made of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. These filters have graded density layers, meaning the outer layers are more porous, catching larger particles, while the inner layers are a finer micron catching smaller particles. Universal Industry Standard filter size of 10” by 2.5” is compatible with most industry standard RO Filter units. Each cartridge is individually shrink-wrapped for purity. How it works?

• Innermost Zone - Small dust is filtered in the following layer to ensure the good filtration efficiency.

• Inner Zone - Small particles pass the outer layers, then filtered by inner layers, which made out of the fine fiber.

• Mid Zone - Multilayered structure layer and depth filtration pattern of the mid zone layer ensures good filtration efficiency and formed by thermal bond without use of any binders and adhesives.

• Outer Zone -The large dusts are filtered in following layer to prolong the filter service life.

This polypropylene sediment filter is compatible with: Ace Hardware (45331), American Plumber (W5P, 155014-52), Ametek (P5), Aqua-Pure (AP110, AP010), Bruner (P5, ED-S-1, SS-10), Bunn (S5-10, ED-S-1), Cornelius (COR120, COR120, COR105), Culligan (P5), Cuno (CFS110), Ecolab (9320-1135), Everpure (Costguard DEV9109-08), Flotec (RS3), Honeywell (RF-60), GE (FXUSC), Puretrex (PX5-978), Kenmore (38480), Kleen Plus (P5), Manitowoc (K-00173, K-00069), Master Plumber (529-286), NuCalgon (4712-87), OmniFilter/Omni Filter (RS4, RS4-SS, RS4-DS), Plymouth Products (P5), Puremark (PFS105), Pentek (P5, 155014-43), Rainsoft (9547, 9577, 9591, 9747, 12461, 13110, 17367, 1227867), Sears (34362), Selecto (101-230), Shurflo (15-052-00, SF31-SEDS), True Value (529-286), USFilter/US Filter (P5), Waterpik (IR-20), Whirlpool (WHCF-GD05), as well as most other brands of water filters. This filter cartridge fits most brands standard 10" x 2.5" housings: American Plumber (W34PR, W34-PR), Culligan (HF-150, HF-150A, HF-160, HF-360, HF-365), Pentek #10 Slim Line housings, most brands' 10" slim housings (Ametek, Bruner, Cuno, Harmsco, Keystone, Kleen Plus, Plymouth Products, US Filters, Water Resources, and other brands).

 Aquaboon 10 x 2.5 Inch. 5 Micron Pleated Polyester Sediment Water Filter Cartridge Benefits:

10" X 2.5" Pleated Polyester Sediment Water Filter Cartridge outperforms wound, spun, melt blown, resin bonded and other depth type filter elements because this cartridge is pleated, it provides increased surface area and longer filter life. Lower pressure drop is another significant advantage of using pleated filter cartridge, which allows for increased flow rates and the use of smaller filter housing to reduce capital equipment costs. Additional savings are provided because cartridge is made with 100% synthetic filter media. A good pleated filter cartridge will outperform other types of cartridges because the filter media is systematically produced using 100% synthetic fibers, with no binders or additives to leave a residue or contaminants. Pleated cartridge provides depth filtration for greater sediment removal, along with more surface area. Washable and reusable, for enhanced value. Recommended for chlorinated water supplies. Greater dirt holding capacity, lower pressure drop, shrink wrapped for purity. This pleated polyester sediment filter is compatible with: American Plumber (W5CP), Ametek (ECP510, ECP5-10), Hydronix (SPC-25-1005), Pentek (ECP5-10, ECP510, 255482-43, 25548243), USFilter/US Filter (ECP510), as well as most other brands of water filters. This filter cartridge fits most brands standard 10" x 2.5" housings: American Plumber (W34PR, W34-PR), Culligan (HF-150, HF-150A, HF-160, HF-360, HF-365), Pentek #10 Slim Line housings, most brands' 10" slim housings (Ametek, Bruner, Cuno, Harmsco, Keystone, Kleen Plus, Plymouth Products, US Filters, Water Resources, and other brands).