Aquaboon 10" Water Filtration System, Includes Pleated Sediment Filter
You are covered by this unconditional money-back guarantee for a full 30 days from your date of purchase.
Free Shipping for continental USMore about shipping
10" Clear Standard Transparent Whole House Water Filter System with pressure relief button. 3/4" inlet/outlet brass port. Wrench and bracket are included. Our housings are used in various applications and usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation.
10" X 2.5" Pleated Polyester Sediment Water Filter Cartridge outperforms wound, spun, melt blown, resin bonded and other depth type filter elements because this cartridge is pleated, it provides increased surface area and longer filter life. Lower pressure drop is another significant advantage of using pleated filter cartridge, which allows for increased flow rates and the use of smaller filter housing to reduce capital equipment costs. Additional savings are provided because cartridge is made with 100% synthetic filter media. A good pleated filter cartridge will outperform other types of cartridges because the filter media is systematically produced using 100% synthetic fibers, with no binders or additives to leave a residue or contaminants. Pleated cartridge provides depth filtration for greater sediment removal, along with more surface area. Washable and reusable, for enhanced value. Recommended for chlorinated water supplies. Greater dirt holding capacity, lower pressure drop, shrink wrapped for purity. This pleated polyester sediment filter is compatible with: American Plumber (W5CP), Ametek (ECP510, ECP5-10), Hydronix (SPC-25-1005), Pentek (ECP5-10, ECP510, 255482-43, 25548243), USFilter/US Filter (ECP510), as well as most other brands of water filters. This filter cartridge fits most brands standard 10" x 2.5" housings: American Plumber (W34PR, W34-PR), Culligan (HF-150, HF-150A, HF-160, HF-360, HF-365), Pentek #10 Slim Line housings, most brands' 10" slim housings (Ametek, Bruner, Cuno, Harmsco, Keystone, Kleen Plus, Plymouth Products, US Filters, Water Resources, and other brands).
|Primary Filter Media:||Pleated Polyester|
|Removes/Reduces:||Sediment (sand, dirt, silt, rust, and scale particles)|
|Size:||10 x 2.5 Inches|
|Fits:||Fits all Standard 10 x 2.5 Inch. Filter Housings|
|Micron Rating (Nominal):||5 Micron|
|Flow Rate:||10 GPM|
|Temperature Rate:||40°F~125°F (4.4°C~51.7°C)|
|Pressure Rate:||Up to 90 PSI|
|Lifetime:||6 month (Replace once or twice times a year, depending on the water quality)|